Industry Announcements

View Press Releases Add Your Press Release provides this section as a service to its readers and customers.

Press releases are subject to approval by the editorial staff of and may be edited or altered for length and clarity, or to remove unsubstantiated and unverifiable claims.

All content presented within the press release section is that of the submitter. does not necessarily endorse such content and bears no responsibility or liability for its accuracy.

NAB 2016: New JVC ProHD Fiber System Supports Multi-Camera Video-Over-IP Workflows

JVC Professional Video, a division of JVCKENWOOD USA Corporation, will introduce a new fiber studio system based on its 800 Series ProHD cameras at the 2016 NAB Show (Booth C4314)

Las Vegas, Nevada(14 Apr 2016)

JVC Professional Video, a division of JVCKENWOOD USA Corporation, will introduce a new fiber studio system based on its 800 Series ProHD cameras at the 2016 NAB Show (Booth C4314), which runs April 18-21 in Las Vegas, Nev. Built exclusively for JVC by MultiDyne Video & Fiber-Optic Systems, the system supports 3G-SDI 1080p/60 camera feeds and returns, and takes advantage of the camera’s built-in streaming engine for video-over-IP functionality.

The camera module connects directly to the back of GY-HM890 camcorder via 68-pin interface – no external cables required – for full studio functionality. It transports multiple bi-directional 3G-SDI signals as well as control, audio, sync, and intercom between the camera and the FS-900 Base Station.

Up to three cameras are supported by the Base Station, and its redundant power supplies provide up to 150 watts for each camera, as well as prompters and talent monitors. Its three-in-one configuration provides a more cost efficient solution than other multi-camera solutions previously offered by JVC and other manufacturers.

With built-in gigabit Ethernet, the lightweight, 2 RU Base Station also allows video-over-IP, control and advanced configuration. The high quality 1080p video signals are ideal for webcasts, virtual sets, and image magnification (I-MAG) applications. The system integrates easily with any studio, mobile truck, or portable flypack, and connects directly with a facility’s switcher, router, intercom, and house sync systems.

“The integration of three cameras with a single base station provides an elegant, compact, and cost effective solution,” explained Edgar Shane, general manager of engineering, JVC Professional Video. “This does it all – at a lower cost than a conventional system with three base stations. Plus, you can add SMPTE 2022 SDI-over-IP functionality, so the system will support your future transition to a fully IP-based workflow.”

JVC will offer an optional multi-viewer card for the Base Station, and the module will be available in multiple configurations to address specific customer cable and intercom requirements. Both the camera module and base station will be available in June 2016, with pricing starting at under $32,000 for a three-camera system.

Headquartered in Wayne, New Jersey, JVC Professional Video is a division of JVCKENWOOD USA Corporation, a wholly-owned subsidiary of JVCKENWOOD Corporation. The company is a leading manufacturer and distributor of broadcast and professional video and audio equipment, as well as D-ILA front projection systems. For more information, visit JVC’s Web site at or call (800) 582?5825.